<?xml version="1.0" encoding="UTF-8"?><metadata>
<idinfo>
<citation>
<citeinfo>
<origin>USFS Columbia River Gorge National Scenic Area</origin>
<pubdate>December 2006</pubdate>
<title Sync="TRUE">NSA_Boundary</title>
<geoform Sync="TRUE">vector digital data</geoform>
<onlink Sync="FALSE">withheld</onlink>
<ftname Sync="TRUE">NSA_Boundary</ftname>
</citeinfo>
</citation>
<descript>
<abstract>Columbia River Gorge National Scenic Area (NSA) boundary developed from the NSA Boundary Legal Description project. USFS surveyors developed this line from the "Official" NSA maps and placed Angle Points. Please also see document: GUIDELINES FOR USE OF THE LEGAL DESCRIPTION OF THE EXTERIOR BOUNDARY of the COLUMBIA RIVER GORGE NATIONAL SCENIC AREA. Edited 08052010 to reflect survey done by D karsh in 2001 clarifying a section of the boundary. Added a "Display" field that is attributed as inside or outside NSA and a "notes" field to explain why this would change with reference to an "AddPt" field in the angle points data. Cgnages should be considered approximate spatial references and verification done using supporting documnets referenced by the unique "AddPt" ID.</abstract>
<purpose>Intended as a GIS "Representation" of the NSA Boundary. The National Scenic Area boundary is a management boundary and should not be used to determine lines of title. This document is intended as a tool for planners and surveyors in interpreting the lines depicted on the initial maps on file with the Chief of the USDA Forest Service.</purpose>
<supplinf>The legal description of the Columbia River Gorge National Scenic Area is as determined by Public Law 99-663 dated September 1986 and shown on maps on file with the Chief of the USDA Forest Service.
Copies of these maps, copies of the congressional working maps, and USGS digital raster graphic quads were used to determine the map boundaries identified in the legal description written under contract 53-04H1-7-83610. Where the boundary is described as following a topographical feature, the actual location of the feature will control the approximate course identifying that part of the boundary. Unless specifically identified, calls to streams shall be to thread and calls to a ridge will be to the crest. Section, Township, Range lines and Section corners established by the United States Public Land Survey shall determine the actual location of these portions of the boundary so described. Section subdivision lines and corners will be established under the rules of the Unites States Public Land Survey system.
The coordinate data base for the Columbia River Gorge National Scenic Area Boundary description was collected from USGS Digital Raster Graphic quads in UTM NAD27 coordinates. The numbers were then processed using Traverse PC software to determine courses and distances. This is the information used to publish the metes and bounds description. Corpscon software is suggested for conversion to State Plane Grid coordinates. Excel spreadsheets for Oregon and Washington contain the written description for the boundary.
The National Scenic Area boundary is a management boundary and should not be used to determine lines of title. This document is intended as a tool for planners and surveyors to interpreting the lines depicted on the initial maps on file with the Chief of the USDA Forest Service.
On November 14, 2005 A Congressionally mandated change was made to the west boundary in T1N R4E Sec 16 and 21 as called for in 16 U.S.C. Sec. 544b(a)(2)(B). Clark County Taxlot boundaries from July 2005, along with maps accompanying the CRGC Staff report dated March 25, 1993 were used as the base layers for digitizing the change.</supplinf>
<langdata Sync="TRUE">en</langdata>
</descript>
<timeperd>
<timeinfo>
<sngdate>
<caldate>December 2006</caldate>
</sngdate>
</timeinfo>
<current>Last edited 08.05.2010</current>
</timeperd>
<status>
<progress>Complete</progress>
<update>None planned</update>
</status>
<spdom>
<bounding>
<westbc Sync="TRUE">-122.412863</westbc>
<eastbc Sync="TRUE">-120.868682</eastbc>
<northbc Sync="TRUE">45.809232</northbc>
<southbc Sync="TRUE">45.509857</southbc>
</bounding>
<lboundng>
<leftbc Sync="TRUE">412581.270448</leftbc>
<rightbc Sync="TRUE">532209.337373</rightbc>
<bottombc Sync="TRUE">1274408.142722</bottombc>
<topbc Sync="TRUE">1305283.130676</topbc>
</lboundng>
</spdom>
<keywords>
<theme>
<themekey>Boundary</themekey>
<themekey>National Scenic Area</themekey>
<themekey>Exterior Boundary</themekey>
</theme>
<place>
<placekey>Columbia River Gorge</placekey>
</place>
</keywords>
<accconst>NONE</accconst>
<useconst>The National Scenic Area boundary is a management boundary and should not be used to determine lines of title. This document is intended as a tool for planners and surveyors to interpreting the lines depicted on the initial maps on file with the Chief of the USDA Forest Service.</useconst>
<native Sync="FALSE">ESRI ArcCatalog 9.3.1.4000</native>
<natvform Sync="TRUE">Shapefile</natvform>
<ptcontac>
<cntinfo>
<cntperp>
<cntper>Mark Garner</cntper>
<cntorg>Columbia River Gorge Commission</cntorg>
</cntperp>
<cntpos>GIS Coordinator</cntpos>
<cntvoice>509.493.3323 ext 226</cntvoice>
<cntemail>garner@gorgecommission.org</cntemail>
</cntinfo>
</ptcontac>
<secinfo>
<secclass>Unclassified</secclass>
</secinfo>
</idinfo>
<spdoinfo>
<direct Sync="TRUE">Vector</direct>
<ptvctinf>
<esriterm Name="ColumbiaGorge_NSA_Boundary_ClipWRA">
<efeatyp Sync="TRUE">Simple</efeatyp>
<efeageom Sync="TRUE" code="4"/>
<esritopo Sync="TRUE">FALSE</esritopo>
<efeacnt Sync="TRUE">0</efeacnt>
<spindex Sync="TRUE">TRUE</spindex>
<linrefer Sync="TRUE">FALSE</linrefer>
</esriterm>
</ptvctinf>
</spdoinfo>
<spref>
<horizsys>
<planar>
<planci>
<plance Sync="TRUE">coordinate pair</plance>
<coordrep>
<absres Sync="TRUE">0.000000</absres>
<ordres Sync="TRUE">0.000000</ordres>
</coordrep>
<plandu Sync="TRUE">meters</plandu>
</planci>
</planar>
<geodetic>
<horizdn Sync="TRUE">North American Datum of 1983</horizdn>
<ellips Sync="TRUE">Geodetic Reference System 80</ellips>
<semiaxis Sync="TRUE">6378137.000000</semiaxis>
<denflat Sync="TRUE">298.257222</denflat>
</geodetic>
<cordsysn>
<geogcsn Sync="TRUE">GCS_North_American_1983</geogcsn>
<projcsn Sync="TRUE">NAD_1983_Albers</projcsn>
</cordsysn>
</horizsys>
</spref>
<eainfo>
<detailed Name="ColumbiaGorge_NSA_Boundary_ClipWRA">
<enttyp>
<enttypl Sync="TRUE">ColumbiaGorge_NSA_Boundary_ClipWRA</enttypl>
<enttypt Sync="TRUE">Feature Class</enttypt>
<enttypc Sync="TRUE">0</enttypc>
</enttyp>
<attr>
<attrlabl Sync="TRUE">Notes</attrlabl>
<attalias Sync="TRUE">OBJECTID</attalias>
<attrtype Sync="TRUE">OID</attrtype>
<attwidth Sync="TRUE">4</attwidth>
<atprecis Sync="TRUE">0</atprecis>
<attscale Sync="TRUE">0</attscale>
<attrdef Sync="TRUE">Internal feature number.</attrdef>
<attrdefs Sync="TRUE">Esri</attrdefs>
<attrdomv>
<udom Sync="TRUE">Sequential unique whole numbers that are automatically generated.</udom>
</attrdomv>
</attr>
<attr>
<attrlabl>Acres</attrlabl>
<attalias Sync="TRUE">display</attalias>
<attrtype Sync="TRUE">String</attrtype>
<attwidth Sync="TRUE">50</attwidth>
<atprecis Sync="TRUE">0</atprecis>
<attscale Sync="TRUE">0</attscale>
<attrdef Sync="TRUE">Internal feature number.</attrdef>
<attrdefs Sync="TRUE">Esri</attrdefs>
<attrdomv>
<udom Sync="TRUE">Sequential unique whole numbers that are automatically generated.</udom>
</attrdomv>
</attr>
<attr>
<attrlabl Sync="TRUE">display</attrlabl>
<attalias Sync="TRUE">Shape</attalias>
<attrtype Sync="TRUE">Geometry</attrtype>
<attwidth Sync="TRUE">0</attwidth>
<attrdef Sync="TRUE">Internal feature number.</attrdef>
<attrdefs Sync="TRUE">ESRI</attrdefs>
<attrdomv>
<udom Sync="TRUE">Sequential unique whole numbers that are automatically generated.</udom>
</attrdomv>
<atprecis Sync="TRUE">0</atprecis>
<attscale Sync="TRUE">0</attscale>
</attr>
<attr>
<attrlabl>Shape</attrlabl>
<attrdef>Feature geometry.</attrdef>
<attrdefs>ESRI</attrdefs>
<attrdomv>
<udom>Coordinates defining the features.</udom>
</attrdomv>
<attalias Sync="TRUE">AREA</attalias>
<attrtype Sync="TRUE">Single</attrtype>
<attwidth Sync="TRUE">4</attwidth>
<atprecis Sync="TRUE">0</atprecis>
<attscale Sync="TRUE">0</attscale>
</attr>
<attr>
<attrlabl Sync="TRUE">AREA</attrlabl>
<attalias Sync="TRUE">PERIMETER</attalias>
<attrtype Sync="TRUE">Single</attrtype>
<attwidth Sync="TRUE">4</attwidth>
<atprecis Sync="TRUE">0</atprecis>
<attscale Sync="TRUE">0</attscale>
</attr>
<attr>
<attrlabl Sync="TRUE">PERIMETER</attrlabl>
<attalias Sync="TRUE">URBAN_</attalias>
<attrtype Sync="TRUE">Integer</attrtype>
<attwidth Sync="TRUE">4</attwidth>
<atprecis Sync="TRUE">0</atprecis>
<attscale Sync="TRUE">0</attscale>
</attr>
<attr>
<attrlabl Sync="TRUE">URBAN_</attrlabl>
<attalias Sync="TRUE">URBAN_ID</attalias>
<attrtype Sync="TRUE">Integer</attrtype>
<attwidth Sync="TRUE">4</attwidth>
<atprecis Sync="TRUE">0</atprecis>
<attscale Sync="TRUE">0</attscale>
</attr>
<attr>
<attrlabl Sync="TRUE">URBAN_ID</attrlabl>
<attalias Sync="TRUE">NAME</attalias>
<attrtype Sync="TRUE">String</attrtype>
<attwidth Sync="TRUE">20</attwidth>
<atprecis Sync="TRUE">0</atprecis>
<attscale Sync="TRUE">0</attscale>
</attr>
<attr>
<attrlabl Sync="TRUE">NAME</attrlabl>
<attalias Sync="TRUE">ACRES</attalias>
<attrtype Sync="TRUE">Double</attrtype>
<attwidth Sync="TRUE">8</attwidth>
<atprecis Sync="TRUE">0</atprecis>
<attscale Sync="TRUE">0</attscale>
</attr>
<attr>
<attrlabl Sync="TRUE">ACRES</attrlabl>
<attalias Sync="TRUE">LUD_EDIT</attalias>
<attrtype Sync="TRUE">String</attrtype>
<attwidth Sync="TRUE">25</attwidth>
<atprecis Sync="TRUE">0</atprecis>
<attscale Sync="TRUE">0</attscale>
</attr>
<attr>
<attrlabl Sync="TRUE">LUD_EDIT</attrlabl>
<attalias Sync="TRUE">Shape_Leng</attalias>
<attrtype Sync="TRUE">Double</attrtype>
<attwidth Sync="TRUE">8</attwidth>
<attrdef Sync="TRUE">Length of feature in internal units.</attrdef>
<attrdefs Sync="TRUE">ESRI</attrdefs>
<attrdomv>
<udom Sync="TRUE">Positive real numbers that are automatically generated.</udom>
</attrdomv>
<atprecis Sync="TRUE">0</atprecis>
<attscale Sync="TRUE">0</attscale>
</attr>
<attr>
<attrlabl Sync="TRUE">Shape_Leng</attrlabl>
<attalias Sync="TRUE">Shape_Area</attalias>
<attrtype Sync="TRUE">Double</attrtype>
<attwidth Sync="TRUE">8</attwidth>
<atprecis Sync="TRUE">0</atprecis>
<attscale Sync="TRUE">0</attscale>
<attrdef Sync="TRUE">Area of feature in internal units squared.</attrdef>
<attrdefs Sync="TRUE">Esri</attrdefs>
<attrdomv>
<udom Sync="TRUE">Positive real numbers that are automatically generated.</udom>
</attrdomv>
</attr>
<attr>
<attrlabl>Shape_Area</attrlabl>
<attrdef>Area of feature in internal units squared.</attrdef>
<attrdefs>ESRI</attrdefs>
<attrdomv>
<udom>Positive real numbers that are automatically generated.</udom>
</attrdomv>
<attalias Sync="TRUE">Shape_Length</attalias>
<attrtype Sync="TRUE">Double</attrtype>
<attwidth Sync="TRUE">8</attwidth>
<atprecis Sync="TRUE">0</atprecis>
<attscale Sync="TRUE">0</attscale>
</attr>
<attr>
<attrlabl Sync="TRUE">Shape_Length</attrlabl>
<attalias Sync="TRUE">Notes</attalias>
<attrtype Sync="TRUE">String</attrtype>
<attwidth Sync="TRUE">250</attwidth>
<atprecis Sync="TRUE">0</atprecis>
<attscale Sync="TRUE">0</attscale>
<attrdef Sync="TRUE">Length of feature in internal units.</attrdef>
<attrdefs Sync="TRUE">Esri</attrdefs>
<attrdomv>
<udom Sync="TRUE">Positive real numbers that are automatically generated.</udom>
</attrdomv>
</attr>
</detailed>
<overview>
<dsoverv>This dataset contains one feature class that represents the exterior boundary of the Columbia River Gorge National Scenic Area.</dsoverv>
</overview>
</eainfo>
<distinfo>
<resdesc Sync="TRUE">Downloadable Data</resdesc>
<stdorder>
<digform>
<digtinfo>
<transize Sync="TRUE">0.000</transize>
<dssize Sync="TRUE">0.000</dssize>
</digtinfo>
</digform>
</stdorder>
</distinfo>
<metainfo>
<metd Sync="TRUE">20100805</metd>
<metc>
<cntinfo>
<cntorgp>
<cntorg>REQUIRED: The organization responsible for the metadata information.</cntorg>
<cntper>REQUIRED: The person responsible for the metadata information.</cntper>
</cntorgp>
<cntaddr>
<addrtype>REQUIRED: The mailing and/or physical address for the organization or individual.</addrtype>
<city>REQUIRED: The city of the address.</city>
<state>REQUIRED: The state or province of the address.</state>
<postal>REQUIRED: The ZIP or other postal code of the address.</postal>
</cntaddr>
<cntvoice>REQUIRED: The telephone number by which individuals can speak to the organization or individual.</cntvoice>
</cntinfo>
</metc>
<metstdn Sync="TRUE">FGDC Content Standards for Digital Geospatial Metadata</metstdn>
<metstdv Sync="TRUE">FGDC-STD-001-1998</metstdv>
<mettc Sync="TRUE">local time</mettc>
<metextns>
<onlink>http://www.esri.com/metadata/esriprof80.html</onlink>
<metprof>ESRI Metadata Profile</metprof>
</metextns>
<langmeta Sync="TRUE">en</langmeta>
</metainfo>
<Esri>
<CreaDate>20210527</CreaDate>
<CreaTime>18564300</CreaTime>
<SyncOnce>FALSE</SyncOnce>
<SyncDate>20210527</SyncDate>
<SyncTime>19000400</SyncTime>
<ModDate>20210527</ModDate>
<ModTime>19000400</ModTime>
<DataProperties>
<itemProps>
<itemName Sync="TRUE">ColumbiaGorge_NSA_Boundary_ClipWRA</itemName>
<imsContentType Sync="TRUE">002</imsContentType>
</itemProps>
<coordRef>
<type Sync="TRUE">Projected</type>
<geogcsn Sync="TRUE">GCS_North_American_1983_HARN</geogcsn>
<csUnits Sync="TRUE">Linear Unit: US survey foot (0.304801)</csUnits>
<projcsn Sync="TRUE">NAD_1983_HARN_StatePlane_Washington_South_FIPS_4602_Feet</projcsn>
<peXml Sync="TRUE">&lt;ProjectedCoordinateSystem xsi:type='typens:ProjectedCoordinateSystem' xmlns:xsi='http://www.w3.org/2001/XMLSchema-instance' xmlns:xs='http://www.w3.org/2001/XMLSchema' xmlns:typens='http://www.esri.com/schemas/ArcGIS/2.6.0'&gt;&lt;WKT&gt;PROJCS[&amp;quot;NAD_1983_HARN_StatePlane_Washington_South_FIPS_4602_Feet&amp;quot;,GEOGCS[&amp;quot;GCS_North_American_1983_HARN&amp;quot;,DATUM[&amp;quot;D_North_American_1983_HARN&amp;quot;,SPHEROID[&amp;quot;GRS_1980&amp;quot;,6378137.0,298.257222101]],PRIMEM[&amp;quot;Greenwich&amp;quot;,0.0],UNIT[&amp;quot;Degree&amp;quot;,0.0174532925199433]],PROJECTION[&amp;quot;Lambert_Conformal_Conic&amp;quot;],PARAMETER[&amp;quot;False_Easting&amp;quot;,1640416.667],PARAMETER[&amp;quot;False_Northing&amp;quot;,0.0],PARAMETER[&amp;quot;Central_Meridian&amp;quot;,-120.5],PARAMETER[&amp;quot;Standard_Parallel_1&amp;quot;,45.8333333333333],PARAMETER[&amp;quot;Standard_Parallel_2&amp;quot;,47.3333333333333],PARAMETER[&amp;quot;Latitude_Of_Origin&amp;quot;,45.3333333333333],UNIT[&amp;quot;US survey foot&amp;quot;,0.304800609601219]]&lt;/WKT&gt;&lt;XOrigin&gt;-117498300&lt;/XOrigin&gt;&lt;YOrigin&gt;-98850300&lt;/YOrigin&gt;&lt;XYScale&gt;3048.00609601219&lt;/XYScale&gt;&lt;ZOrigin&gt;-100000&lt;/ZOrigin&gt;&lt;ZScale&gt;10000&lt;/ZScale&gt;&lt;MOrigin&gt;-100000&lt;/MOrigin&gt;&lt;MScale&gt;10000&lt;/MScale&gt;&lt;XYTolerance&gt;0.0032808333333333353&lt;/XYTolerance&gt;&lt;ZTolerance&gt;0.001&lt;/ZTolerance&gt;&lt;MTolerance&gt;0.001&lt;/MTolerance&gt;&lt;HighPrecision&gt;true&lt;/HighPrecision&gt;&lt;/ProjectedCoordinateSystem&gt;</peXml>
</coordRef>
</DataProperties>
<ArcGISFormat>1.0</ArcGISFormat>
</Esri>
<dataqual>
<lineage>
<procstep>
<procdesc Sync="TRUE">Metadata imported.</procdesc>
<srcused Sync="FALSE">withheld</srcused>
<date Sync="TRUE">20070123</date>
<time Sync="TRUE">12342400</time>
</procstep>
<srcinfo>
<srcscale>1:24,000</srcscale>
<typesrc>paper</typesrc>
</srcinfo>
<procstep>
<procdesc Sync="TRUE">Dataset copied.</procdesc>
<srcused Sync="FALSE">withheld</srcused>
<date Sync="TRUE">20070323</date>
<time Sync="TRUE">10083700</time>
</procstep>
</lineage>
</dataqual>
<dataIdInfo>
<envirDesc Sync="FALSE">Esri ArcGIS 12.6.2.24783</envirDesc>
<dataLang>
<languageCode Sync="TRUE" value="eng"/>
<countryCode Sync="TRUE" value="USA"/>
</dataLang>
<idCitation>
<resTitle Sync="TRUE">ColumbiaGorge_NSA_Boundary_ClipWRA</resTitle>
<presForm>
<PresFormCd Sync="TRUE" value="005"/>
</presForm>
</idCitation>
<spatRpType>
<SpatRepTypCd Sync="TRUE" value="001"/>
</spatRpType>
<dataExt>
<geoEle>
<GeoBndBox esriExtentType="native">
<westBL Sync="TRUE">412581.270448</westBL>
<eastBL Sync="TRUE">532209.337373</eastBL>
<northBL Sync="TRUE">1305283.130676</northBL>
<southBL Sync="TRUE">1274408.142722</southBL>
<exTypeCode Sync="TRUE">1</exTypeCode>
</GeoBndBox>
</geoEle>
</dataExt>
<geoBox esriExtentType="decdegrees">
<westBL Sync="TRUE">-122.412863</westBL>
<eastBL Sync="TRUE">-120.868682</eastBL>
<northBL Sync="TRUE">45.809232</northBL>
<southBL Sync="TRUE">45.509857</southBL>
<exTypeCode Sync="TRUE">1</exTypeCode>
</geoBox>
</dataIdInfo>
<mdLang>
<languageCode Sync="TRUE" value="eng"/>
<countryCode Sync="TRUE" value="USA"/>
</mdLang>
<mdStanName Sync="TRUE">ISO 19115 Geographic Information - Metadata</mdStanName>
<mdStanVer Sync="TRUE">DIS_ESRI1.0</mdStanVer>
<mdChar>
<CharSetCd Sync="TRUE" value="004"/>
</mdChar>
<mdHrLv>
<ScopeCd Sync="TRUE" value="005"/>
</mdHrLv>
<mdHrLvName Sync="TRUE">dataset</mdHrLvName>
<distInfo>
<distributor>
<distorTran>
<onLineSrc>
<orDesc Sync="TRUE">002</orDesc>
<linkage Sync="FALSE">withheld</linkage>
<protocol Sync="TRUE">Local Area Network</protocol>
</onLineSrc>
<transSize Sync="TRUE">0.000</transSize>
</distorTran>
<distorFormat>
<formatName Sync="TRUE">Shapefile</formatName>
</distorFormat>
</distributor>
<distFormat>
<formatName Sync="TRUE">File Geodatabase Feature Class</formatName>
</distFormat>
</distInfo>
<refSysInfo>
<RefSystem>
<refSysID>
<identCode Sync="TRUE" code="0">NAD_1983_Albers</identCode>
</refSysID>
</RefSystem>
</refSysInfo>
<spatRepInfo>
<VectSpatRep>
<geometObjs Name="ColumbiaGorge_NSA_Boundary_ClipWRA">
<geoObjTyp>
<GeoObjTypCd Sync="TRUE" value="002"/>
</geoObjTyp>
<geoObjCnt Sync="TRUE">0</geoObjCnt>
</geometObjs>
<topLvl>
<TopoLevCd Sync="TRUE" value="001"/>
</topLvl>
</VectSpatRep>
</spatRepInfo>
<mdDateSt Sync="TRUE">20210527</mdDateSt>
</metadata>
